12v 200 AH 2.56Kwh Sinotec Lithium Battery LiFePO4
Lead Time 2-3 Business days
Available online & in-store
Delivery estimated within 20/11 and 29/11
12v 200 AH Sinotec Lithium Battery
-
- The bolts can be replaced with M8 bolts of other lengths based on actual needs.
-
- For a longer-lasting product, it is best to store your battery at a 50% charge level and recharge every three months if it is not going to be used for a long time.
-
- The battery can be operated at a temperature of -20°C to 60°C / -4°F to 140°F, and a temperature between 10°C to 35°C / 50°F to 95°F is ideal for long-term storage. Store in a fireproof container and away from children.
- - The material characteristics of the LiFePO4 battery determine that it charging curve is obviously different from that of a lead-acid battery. Compared with a lead-acid battery, the LiFePO4 battery has a simpler charging process and mode. Therefore, it is recommended to select LiFePO4 for your charging mode.
- - Always put on the insulating covers on the post bolts to avoid metal or conductive objects touching the positive and negative terminals of the battery at the same time, otherwise it is likely to cause a short circuit.
- - Install the battery upright with post bolt facing up, and it could not be mounted upside down. If you need to mount the battery at its side, please contact https://www.sinotec.co.za/ to confirm the direction.
- - Tightly screw in the post bolts. Having loose battery terminals will cause the terminals to build up heat resulting in damage to the battery.
- - This battery is not intended to be used to start any devices, please DO NOT use it as a starting battery.
Inverter settings:
|
Bulk Charge Voltage
|
14.2V
|
|
Float Voltage
|
13.5V
|
|
Cut Off Voltage |
11.2V
|
Battery-Pack Main Parameters:
|
Cell
|
Prismatic LiFePO4 Battery
|
|
Nominal Capacity
|
200Ah
|
|
Usable Capacity
|
200Ah
|
|
Nominal Voltage
|
12.8V
|
|
Energy
|
2560Wh
|
|
Charge Method
|
CC/CV
|
|
Charge Voltage
|
14.4±0.2V
|
|
Recommend Charge Current
|
20A
|
|
Battery Management System (BMS) Board
|
100A
|
|
Max. Continuous Charge / Discharge Current
|
100A
|
|
Max. Discharge Current 5 Seconds
|
300A
|
|
Max. Continuous Load Power
|
2560W
|
|
Cycle Life
|
≥5000 times
|
|
Internal Impedance
|
≤20mΩ
|
|
Battery Pack Case
|
Acrylonitrile Butadiene Styrene (ABS) Plastic
|
|
Protection Class
|
IP65
|
|
Weight
|
19.7Kg
|
|
Dimension (L/W/H)
|
522/240/218 mm
|
|
Temperature Range
|
Charge 0°C to 50°C
|
|
|
Discharge -20°C to 60°C
|
|
|
Storage -10°C to 50°C
|
State Of Charge (SOC): Its rest voltage (not charging/discharging voltage).
|
Capacity
|
Charge Voltage
|
|
100%
|
13.5V
|
|
99%
|
13.4V
|
|
90%
|
13.3V
|
|
70%
|
13.2V
|
|
40%
|
13.1V
|
|
30%
|
13V
|
|
20%
|
12.9V
|
|
10%
|
12.8V
|
|
1%
|
10.8V (recommend low voltage disconnect voltage)
|
|
0%
|
9.5V
|
Terminal & Post Bolts:
|
Terminal Size
|
M8(1.25mm Metric Thread)
|
|
Post Bolts
|
M8(1.25mm Metric Thread * 14mm Bolt Length) |
3 Years Warranty
Warranties:
All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.
